Live-Edge Tables for Interior Designers in Cincinnati

Get a quote on your slab

Send it

Spec-Ready Slab Selection for Your Client Presentations

Designers need options, not guesses. Walk the yard at 4450 Emerald Ave and photograph actual slabs: walnut, oak, maple, each with its own grain and live edge profile. We log species, dimensions, and moisture status so you can drop real numbers into your project file. For client presentations, that means honest photos of the actual piece under consideration, not stock imagery. If a client wants a specific look, we help narrow the stack to two or three candidates that fit the room's palette and budget. You keep creative control. We handle the wood.

Custom Sizing, Legs, and Finishes Matched to the Design Plan

Your drawings set the dimensions. We build to them. Every live-edge table gets flattened, dried, and finished to the spec you hand us: matte, satin, or a custom stain pulled from another element in the room. Base options run from steel pin legs to trestle styles, and we can coordinate metal finish with the hardware already specified. Odd room footprints and tight clearances are normal work for us. Send the plan, the target dimensions, and the finish direction. We confirm what the slab can do before any cutting starts, so nothing surprises you at install.

Lead Times and Communication That Fit a Project Schedule

Furniture lands at the end of a project timeline, so the table has to be right the first time. A live-edge build typically runs flattening, drying checks, shaping, and finish, with curing time before delivery. We give you a realistic window up front and flag any risk early, like a slab that needs extra drying or an edge profile that changes the footprint. One point of contact from slab pick to delivery. Designers working in Cincinnati, Madeira, Indian Hill, and Montgomery can send clients to the shop to approve the piece in person before final finish.

Why Designers Keep Coming Back to the Same Yard

Repeat work runs on trust and consistency. Clients remember the table long after the paint cures, and a one-of-a-kind slab becomes the story of the room. Every piece we cut is singular, so you are never specifying something your client's neighbor already owns. We stay plain about what wood will and will not do: which species resist dings in a family room, which finishes hold up under real use, where a natural edge reads better than a straight cut. That honesty saves you a difficult client conversation later.

Live-Edge Tables for Interior Designers in Cincinnati FAQs

Can I bring a client to select the slab?

Yes. The shop at 4450 Emerald Ave is open Tuesday through Thursday from 12:30 to 5:30 PM and Saturday from 9:00 AM to 1:00 PM. Walk the stack together, compare grain patterns, and mark the slab you want reserved for the project. Seeing the actual wood settles most client decisions in one visit.

Can you match a finish or stain from my design plan?

Bring a sample, a photo, or a finish name. We test the stain on offcuts of the actual slab before committing, because the same stain reads differently on walnut than on oak. You approve the test piece before we finish the full table, so the delivered piece matches the room you designed.

Do you work from designer drawings and dimensions?

We build to the dimensions you provide, including custom lengths, widths, and heights for unusual room layouts. Before cutting, we confirm the slab can hit your target size with the edge profile you want. If the drawing needs adjusting to suit the wood, you hear it from us first, not after the cut.

What species do you recommend for high-use client spaces?

Walnut and hard maple are dependable for dining tables that see daily use. Oak brings prominent grain and durability. For a statement piece in a lower-traffic room, nearly any species works. We talk through the client's household, kids, pets, and cleaning habits, then point you to slabs that will hold up, not just look good on day one.

Not covered here? Call the shop. Ask your question